Spectra DG613 Dialgrade Pipe Laser |
- Compact and Powerful
- Grade Range -12% to +40%
- Self-Leveling over the entire grade range
- Full cross axis compensation
- RC803 Remote works via Radio and Infrared
|
Spectra Precision DG613 Pipe Laser OVERVIEW Designed to fit around tighter inverts, the Spectra Precision DG613 delivers the most productive pipe laying experience in the market. They are extremely rugged and thrive in demanding underground conditions. Benefiting from the latest technology developed by Spectra Precision, the beams move quickly and accurately for alignment and grade. Spectra's DG613 helps you improve efficiency and provide unprecedented performance and reliability.
The Spectra Precision DG613 Pipe Laser is built for efficiency, accuracy and reliability when laying pipes. Working in trenches just got easier with the new range of pipe lasers from Spectra Precision.
The length of the DG613 has been reduced to make it easier to set up the lasers into tight inverts in the manhole. The DG613 has a grade range from -12% to +40% and is fully self-leveling over the entire grade range. Even the cross axis is fully compensated providing quick set up and peace of mind that the laser will be level without having to adjust at the bottom of the invert.
The DG613 works over a distance of 500ft providing full operation in a single set-up between manholes. The new RC803 remote control provides full function control and utilizes infrared light in the pipe for up to 500 feet control. For "over-the-top" setups, the remote utilizes radio communications up to a distance of 430 feet.
Flexible power options provide 40 hours operating time with NiMH rechargeable batteries and 50 hours with alkaline batteries. Alkaline batteries can be used directly at the laser without a separate battery pack. An additional car charger is available for work in remote areas.
Large graphical user interface can be seen easily when the laser is in a manhole. All functions are available via graphical menu which makes it simple and easy to use - no secret button pressing and short learning curve means it can be handed to anyone in your crew with little or no training. The same graphical user interface is used at the RC803 remote control.
|
Spectra Precision DG613 Pipe Laser Includes |
|
- Pipe Laser DG613
- Trivet Pipe Centering Plate (8-inch pipe) 1248
- Infrared Radio Remote Control RC803 with hand loop
- Target 956 with two target plates
- NiMH rechargeable battery pack Q104667 (blue)
- Smart Charger Q104781
- Carrying Case
- Operating Manuel
- 5-Year Warranty
|
|
|
Spectra Precision DG613 FEATURES and BENEFITS |
- New reduced length allows easy set-up even in tight inverts
- Self leveling range of -12% to +40% over the entire grade range
- Cross axis compensation provides a quicker more accurate set-up as the laser does not have to be level in the pipe – place it in the pipe it levels, you work.
- Bright visible beam that works up to 150m (500 feet)
- RC803 remote works via radio 130m (430 feet) or infra-red 150m (500 feet) for both “over-the-top” set-up and in pipe/trench set-up.
- Large, bright, graphical user interface makes the screen easier to see and use when in or out of the pipe. Same graphical user interface can be seen on the remote – what you see on the laser you see on the remote.
- The Spectra Precision DG613 has advanced functions that make setting up and using it easier and more accurate:
- Line-Set/Check – allows the user to align the laser to the manhole quickly and easily to set direction. The beam will go up to 100% allowing easy alignment even in short trenches
- Line Scan – provides a quick alignment to the center of the target for the second day setup
- Line Alert- notifies the user if the set-up is disturbed eliminating costly re-work from errors
|
Spectra Precision DG613 APPLICATIONS |
- Installation of gravity flow sanitary pipelines
- Storm sewer pipelines
- Pipe jacking
- Can be used in a pipe or in “Over the Top” set-ups
|
SPECTRA PRECISION DG613 KEY FEATURES |
- SELF-LEVELING The Spectra DG613 features the largest automatic leveling range in the industry providing quick, easy setups, regardless of grade. Unlike traditional pipe lasers, they eliminate the need for rough leveling and minimize crew training. Simply set up the laser in the pipe, manhole or open cut without the need to swivel or rough level the unit. - LINE ALERT This unique feature is ideal for working in high-vibration or wet conditions where the pipe lasers may be disturbed. The beam flashes to notify you that the setup line has been disturbed, eliminating the necessity of rework. Combined with the self-leveling warning, you’ll always complete the job correctly, on time and on budget! - LINE SET The Line Set/Check capability of both pipe lasers allows you to raise the beam up to 100% outside of the trench for fast line setup or checking. Raising the laser beam out of the trench to an above-ground stake saves you time—instead of having to move the excavator off line during setup of the pipe laser, you can just get on with your job. In addition, the Line Set-Check feature is ideal for rechecking the line for pipe jacking after each push. - TARGET Our patented Target Lens collects the beam and transfers the spot up to the pipe layer’s angle of view, making it very easy to see the laser beam (inclusive in the standard package). - Shorter Length - Grade Range -12% to +40% Self Leveling over the entire grade range and full cross axis compensation Ultra-Fast beam movement - Operating Range up to 500-foot with radio / IR remote control - BIG and Intuitive Graphic Display at the Laser and Remote Control - IP68 protection (dust and waterproof) - Flexible power options (NiMH / Alkaline) Includes Rechargeable Batteries but can use Alkaline batteries as back-up. - Advanced Functions squeezing work time: LINE SET/CHECK (first day set-up), LINE SCAN (second day set-up) and LINE ALERT
|
Spectra Precision DG613 TECHNICAL SPECIFICATIONS |
- Accuracy, Self-Leveling (level) 1,3
- ± 1.5 mm/30 m, (1/16 in @ 100 ft) 10 arc seconds
- Operating Range 1,2
- Laser Type red diode laser 600 - 680 nm
- Laser class Class 3A/3R, <5mW OR Class 2
- Self-leveling range
- Longitudinal Over the entire grade range with automatic cross axis compensation (no rough leveling required)
- Grade range -12% to +40%
- Line Range 20° ±1°
- Leveling indicators LCD indications; beam and LED flash
- Power source 10000mAh NiMH battery pack
- Battery life 1
- 40 hours NiMH
- 50 hours alkaline
- Temperature compensation Yes
- Length 9.8-inches (25 cm)
- Diameter 5.3-inches (13,5 cm)
- Operating Temperature -4°F to 122°F (-20°C to 50°C)
- Storage temperature -4°F to 158°F (-20°C to 70°C)
- Tripod attachments 5/8 x 11 horizontally
- Dust and Water proof IP68
- Weight 6.61-lbs(3,98 kg)
- Low voltage indication LCD battery indicator
- Low voltage disconnection unit shuts off
|
Included Remote Control Spectra RC803 TECHNICAL SPECIFICATIONS |
- Radio operating range (Over the Top):1,3
- IR operating range (front) 1,4
- Power source 2 x 1.5V AA alkaline batteries
- Battery life 1 130 hours
- Dust and Water proof IP66
- Weight (incl. batteries) 0.57 lbs (0.26 kg)
|
Spectra Precision DG613 Package CONFIGURATION OPTIONS
|
Part Number |
DG613 |
DG613-5 |
DG613-6 |
DG613-13 |
DG613 Pipe Laser |
✔ |
✔ |
✔ |
✔ |
1248 Trivet Plate 8-inch (Centering Plate) |
✔ |
✔ |
✔ |
✔ |
1230 Large Invert Plate |
|
✔ |
|
|
1237 Large Invert Plate Metric |
|
|
✔ |
|
1239 Vertical Pole |
|
✔ |
✔ |
|
RC803 Remote Control |
✔ |
✔ |
✔ |
✔ |
956 Target |
✔ |
✔ |
✔ |
✔ |
1263 Precision Scope |
|
|
|
✔ |
Q104781 120V Wall Charger |
✔ |
✔ |
✔ |
✔ |
Q104781 Rechargeable Batteries
|
✔
|
✔
|
✔
|
✔ 2 each
|
P25 Power Cigarette Outlet Charger |
|
|
|
✔ |
|
|
Spectra Precision DG511 vs DG613 FEATURE ADVANTAGES |
FEATURE |
DG511 |
DG613 |
BENEFIT |
|
|
|
Shorter DG613 housing fits better into curved pre-fabricated inverts |
Accuracy (level) |
1.5 mm at 30 m |
1.5 mm at 30 m |
|
Grade Range |
-15% to +40% |
-12% to +40% |
DG613 beam can be moved up to 100% for first day setup |
Self-Leveling Range |
Longitudinal: Over the entire grade range (no rough leveling required);+/-3°: Cross Axis compensation |
Longitudinal: Over the entire grade range (no rough leveling required) Cross axis is fully compensated |
Easier and quicker setup because no cross axis adjustment required at the DG613 |
Alkaline/Recharge |
D-cell NiMH (64 hrs) D-cell Alkaline (40 hrs) |
D-cell NiMH (40 hrs) D-cell Alkaline (50 hrs) |
|
Remote Control |
RC501: 3 button IR remote |
RC803: 8 button Radio/IR remote |
|
Menu/Graphic Display |
Hidden menu |
Easy access, easy to understand |
available in 14 languages |
Line Set/Check
|
NO |
YES |
Faster Set-UP |
Line Scan |
NO |
YES |
Better speed of adjustment on DG613 |
Remote Control
|
|
|
RC603 has full featured remote control |
|
|
|
|
|
>>> SPECTRA DG613 PIPE LASER QUICK PRODUCT OVERVIEW >>>
|