Topcon RL-H5A Self-Leveling Laser PS.RB Kit with LS-80X Receiver and Rechargeable Batteries- 1021200-49

• Self-Leveling Horizontal Beam
• Long Range Operation 2,600 ft diameter
• High Horizontal Accuracy 1/16-inch @ 100-feet
• Simple, intuitive manual slope capability 
• Tough IP66 Rating - Dust and Water Rating
• Self-Leveling Range ± 5 degrees
• Long Rechargeable battery life - 60 hours
• Back-Up Alkaline battery life - 100 hours
• Out of Level Notification

• RL-H5A Horizontal Laser 
  
• LS-80X Long Range Laser Receiver Sensor 1046259-01
  
• Receiver Rod Clamp Holder 6 312890112
  
• (4) D-Cell NiMH Rechargeable Batteries BT-79Q 1025029-01
  
• Rechargeable Battery Holder 1024993-01
• AC Adapter / Charger 1024944-02
• Rugged Hard Shell Carrying Case
• 5-Year Warranty Guarantee

MULTI-PURPOSE LASER
Grading, excavating and general construction projects are perfect applications for the RL-H5A.  With the added "Slope Matching" feature, check grade on all your flat and slope work.  The 600 rpm rotation speed makes the Topcon RL-H5A a great match with any machine mounted laser sensor.

EASY TO USE
With electronic self-leveling you press the power button and go right to work in seconds.  If the TOPCON RL-H5A gets disturbed on the job it re-levels itself automatically.  The Self-Leveling motors are accurate to ± 10 arc seconds.

LONG RANGE OPERATION
Need to shoot elevations up to 1,300 feet from your laser?  No problem, this TOPCON RL-H5A has a workable power and range of 2,600 feet diameter on the jobsite.

ALL WEATHER DEPENDABILITY
With the IP66 rating, the TOPCON RL-H5A is JOBSITE TOUGH and can withstand dust, a sudden shower and even a torrential rainfall.

5-YEAR GUARANTEE
The TOPCON RL-H5A Laser comes with a FIVE YEAR GUARANTEE.  Topcon is backing up this reliable, accurate laser with the best factory warranty in the industry.

Topcon LS-80X LONG RANGE LASER SENSOR
New laser sensor LS-80X offers increased working range* even with other Topcon rotating lasers.  It indicates the laser beam position with two LCD's on both sides plus audible tone.  The LCD icons also notify the HI Alert and Low Battery warnings of the RL-H4RC laser.

The Topcon LS-80X Laser Receiver Sensor Detector is able to allow you to have a longer range when using a red beam rotary laser. The unit can be adjusted for either a fine or course band, which will help improve the accuracy. It has an audible notice for the height, to make sure it is adjusted properly. You can select from 11 different channels to display the data on the LCD display.

With a rating of IP-66, the Topcon LS-80X Laser Receiver Sensor Detector is protected against dust and water. The unit is in a rubber case, so it is also protected against dropping it. It will stand up to a variety of job conditions. It can also be mounted with a Holder 6 bracket, so it will be more stable.

The Topcon LS-80X Laser Receiver Sensor Detector runs on two AA batteries. It will run for up to 120 hours, allowing for plenty of work time on the job site. It will also shut down after 30 minutes if it hasn't been used, to help save the battery life.

Topcon LS-80X Receiver FEATURES

• Increase range of rotary lasers
• Fine or course sensitivity
• Height alert
• IP-66 rating against dust and water
• Uses AA batteries
• Low battery alert
• 30 minute shut down
• Protective case
• LCD display
• 2-inch capture window

*Approximately 20 percent increase.